MZ3-V11-STD - Touch controller (CH)
Positioner and controller with touch panel. Swiss version to fit Swiss standard electrical connection boxes.
The MZ3 is a microprocessor controlled precision positioner and controller with touch panel. It includes a white STANDARDdue frame and mounting plate.
Through parameters the positioner may be configured to work for most of the standard ventilation applications. Settings such as switching levels of the control curve and ventilation strengths for each step may be adjusted. The configuration may be performed using the programming device called OPA-S. Additionally it is now possible to copy the entire configuration by using the accessory AEC-PM2.
The device includes a control function and is able to control ventilation level based on an input of a sensor (CO2, VOC, RH, Temperature) or a building automation system.
- For ventilation systems for comfort applications
- For example for well insulated residential areas which are required to be ventilated
- Positioner and controller for comfort ventilation with touch panel
- Design according to Feller STANDARDdue®
- Manual operation with four steps, OFF, minimum air, 1st step, 2nd step, maximum air
- AUTO operation: The controller activated the ventilation based on control curve. The controls curve may be adjusted
- Automatic reset of the maximum air level
- One 0...10 VDC controls output to control the ventilation system
- One 0...10 VDC input to measure CO2 or other sensors
- Password protected control settings
|Item name||Item code||Variant||Description|
Blue LED, white frame
Compact positioner/controller in a
|OPA-S||40-500006||Programming and display device||
LDC display for surface mounting
|AEC-PM2||40-500130||Memory device||Used to copy device configuration|
- 70-00-0990B Wiring Guide.pdf
- 70-10-0874A MZ3-V11-STD V2_2 Short Instructions.pdf
- 70-00-0873A MZ3-V11-STD V2_2 install.pdf